Microsens RS232 Especificaciones descargar pdf (Pagina 52)

19'' 6U Chassis page 52/71

• Use your SNMP browser to check the backup file presence in the FLASH

memory of the MGNT management board using the table:

• mgnt2CnfManageConfigFilesTable

Location: …\microsens\mgnt2\mgnt2ConfigManagement

From this point the maintenance configuration feature is enabled. It means that

if a new MSxxxxxxx module is plugged in the slot number pointed by the backup

file, the MGNT management board will performed the following process:

• Check if the backup file is compatible with the MSxxxxxxx module plugged in

(i.e. same number of line ports and same number of client ports)

• If the compatibility is correct, the backup file configuration will be

automatically transferred to the MSxxxxxxx module.

2. Transferring the backup file

The object of this phase is to transfer the backup file from the FLASH memory to the

RAM memory of the MGNT management board.

• Use your SNMP browser to check the backup file presence in the RAM

memory of the MGNT management board using the table:

• mgnt2CnfUploadConfigFilesTable

Location: …\microsens\mgnt2\mgnt2ConfigManagement

There is space to store four configuration files in The RAM memory. At this stage

in the procedure, there should be no file in the RAM memory.

If there is no free space any more in the RAM memory, you may delete a backup

file from the RAM memory using the object:

• mgnt2CnfDeleteConfigFile

Location:...\microsens\mgnt2\mgnt2ConfigManagement\mgnt2CnfUploadConfigF

ilesTable

• Export the backup file previously created in the FLASH memory to the RAM

memory using the object:

mgnt2CnfExportConfig

Location:...\microsens\mgnt2\mgnt2ConfigManagement\mgnt2CnfManageConfig

FilesTable

• Use your SNMP browser to check the backup file presence in the RAM

memory of the MGNT management board using the table:

• mgnt2CnfUploadConfigFilesTable

Location: …\microsens\mgnt2\mgnt2ConfigManagement

The backup file is now located in the RAM memory and is accessible via a TFTP

command.

3. Get the backup file

The object of this phase is to get the backup file in the RAM memory of the MGNT

management board.

MICROSENS GmbH & Co. KG - Küferstraße 16 - 59067 Hamm - Tel. +49 2381/9452 0 - Fax 9452 100 - www.microsens.com

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 70 71

Sin comentarios

Microsens RS232 Especificaciones Pagina 52