Microsens RS232 Especificaciones descargar pdf (Pagina 22)

19'' 6U Chassis page 22/71

SNMP User Manual

Initial Set-Up and Configuration

Configuration

Connecting to the manager

The MS430502M chassis contains an on-board SNMP agent which allows it to be

managed from any point in your network using network management software. Access

is via the RJ45 10 Mbit Ethernet port on the front panel.

It is necessary to have the latest compiled MiB.

Verification of the connection can be achieved by sending a “ping” message to the IP

address of the MS430502M chassis.

Each MS430502M chassis is shipped the following default configuration:

Parameter Default value

IP address 192.168.16.201

IP subnet Mask 255.255.255.0

IP manager List

One manager address:

192.168.16.202

Gateway address

192.168.16.254 rank 1

192.168.16.254 rank 2

Chassis name NoName

SNMP communities

SNMP Get: public

SNMP Set: private

SNMP Trap: public

CLI passwords

administrator: administrator

maintenance: maintenance

MScraft passwords

Admin: admin

Operator: operator

Read-only: readonly

Once a connection is established to the MS430502M chassis configuration may begin.

Setting the MS430502M chassis IP Address

The MS430502M chassis IP address manipulation can be changed off site prior

installation. There are three different methods to define the IP address of the

MS430502M chassis:

• Automatic with BOOTP

The object: mgnt2GigmIPAddresByDHCP

Location: ...\microsens\mgnt2\mgnt2SNMPAgentData\ mgnt2IPmanagment

Setting this object to 2 enables the automatic IP address configuration by

BOOTP. In this case, changes are done after a reset of the board.

MICROSENS GmbH & Co. KG - Küferstraße 16 - 59067 Hamm - Tel. +49 2381/9452 0 - Fax 9452 100 - www.microsens.com

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 70 71

Comentarios a estos manuales

Sin comentarios

Microsens RS232 Especificaciones Pagina 22

Comentarios a estos manuales