Microsens RS485 Manual de usuario descargar pdf (Pagina 32)

MICROSENS User Manual Device Server RS-232/422/485 Port to 1x or 2x 10/100TX

and Device Server RS-232/422/485 Port to 1x 100FX

TCP Client

In TCP Client mode, you need to define the destination host IP and port number,

Idle timeout, Alive check. To deploy multilink, specify up to 4 more hosts IP and

Port number.

TCP Client Mode page

Idle Timeout: When serial port stops data transmission for a defined period of

time (Idle Timeout), the connection will be closed and the port will be freed and

re-try for connection with other hosts. Zero is to disable this setting (default). If

Multilink is configured, only the first host connection is effective for this setting.

Alive Check: The device server device will send TCP alive check package in each

defined time interval (Alive Check) to remote host to test the TCP connection. If

the TCP connection is not alive, the connection will be closed and the port will be

freed for other hosts. Zero is to disable this setting (default).

Connect on Startup: The TCP Client will build TCP connection once the

connected serial device is startup.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 43 44

Sin comentarios

Microsens RS485 Manual de usuario Pagina 32