Microsens RS485 Manual de usuario descargar pdf (Pagina 18)

MICROSENS User Manual Device Server RS-232/422/485 Port to 1x or 2x 10/100TX

and Device Server RS-232/422/485 Port to 1x 100FX

Installation Steps

1. Unpack the device server

2. Check if the DIN-Rail is screwed on the device server or not. If the DIN-Rail is

not screwed on the device server, please refer to DIN-Rail Mounting section

for DIN-Rail installation. If you want to wall mount the device server, then

please refer to Wall Mount Plate Mounting section for wall mount plate

installation.

3. Power on the device server. Please refer to the Wiring the Power Inputs

section for knowing the information about how to wire the power. The power

LED on the device server will light up. Please refer to the LED Indicators

section for indication of LED lights.

4. Prepare the twisted-pair, straight through Category 5 cable for Ethernet

connection.

5. Insert one side of RJ-45 cable (category 5) into the device server Eth1 or Eth2

port and another side of RJ-45 cable (category 5) to the PC or NB’s Ethernet

port. The Eth1 or Eth2 LED on the device server will light up when the cable is

connected with the PC or NB. Please refer to the LED Indicators section for

LED light indication.

Power On

Connect the power adapter to PWR1 or PWR2 socket on the top side of the device

server. The other side of power cord connects to the power outlet. The internal

power works with DC in the voltage range of 12-48V. Check the power indicator

on the front panel to see if power is properly supplied.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 43 44

Sin comentarios

Microsens RS485 Manual de usuario Pagina 18