Microsens Media Converter/Signal Repeater Module Manual de usuario Pagina 16

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 43
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 15
MICROSENS
MICROSENS GmbH & Co. KG - Kueferstr. 16 - D-59067 Hamm - Germany - Tel. +49 (0) 2381/9452-0 Fax -100 - www.microsens.com
RS-232/V.24
Transceiver
Technical Specifications
Type Fiber optic transceiver
for RS-232 interface
Datarate max. 120 kbit/s
Connectors 1 x SUB-D 9 pin (RS-232)
2 x ST-connector
1 x power supply jack 2.1 mm
Fiber type Multimode fiber, duplex, 50 or
62.5/125 µm, Single Mode
fiber 9/125 µm,
ST-connector
Max. fiber length MM: 2 km, SM: 5 km
LED displays Power, Receive, Transmit
Operating temp. 0°C to 50°C
Power supply Ext. supply
Dimensions 66 x 44 x 21 mm (w x d x h)
Order Information
Part-no. Description Connectors
MS650121 RS-232 Transceiver 1 x SUB-D 9 pin
Multimode 2 x ST
MS650122 RS-232 Transceiver 1 x SUB-D 9 pin
Single Mode 2 x ST
Fiber optic transceiver for RS-
232 interfaces.
The MICROSENS RS-232
transceiver offers the
transmission of standard RS-
232/V.24 signals over fiber.
Especially in industrial areas
the use of fiber offers
advantages like interference
safety, immunity and safety
from interception as well as a
complete galvanic isolation
between sender and receiver.
The transceiver has two ST
connectors for the fiber
connection and using multi-
mode fiber distances of up to
2 km can be reached.
An additional transceiver
version for single mode fiber
is available. With this version
distances of up to 5 km can
be reached.
Due to their extreme
compact design, the
transceiver can be connected
directly onto the interface of
the station.
Three LEDs inform about the
status of the transceiver and
the data connection.
The transceiver is also
available as an insertion
module for the mounting
into the modular 19“ media
converter system.
Vista de pagina 15
1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 42 43

Comentarios a estos manuales

Sin comentarios