Microsens 10/100Base-TX to 100Base-FX Manual de usuario descargar pdf (Pagina 7)

Fast Ethernet Switches for Industrial Use Page 7/10

MICROSENS GmbH & Co. KG - Kueferstraße 16 - 59067 Hamm / Germany - Tel. +49 23 81/94 52-0 - FAX -100 - www.microsens.com

DIN-Rail Mounting

You can also mount Industrial switch on a standard DIN-Rail by below steps.

The DIN-Rail kit is screwed on the industrial switch at delivery. If the DIN-Rail kit is not

screwed on the industrial switch, please screw the DIN-Rail kit on the switch first.

1. First, hang the Industrial switch to the DIN-Rail with angle of inclination.

Fig. 4: Installation to DIN-Rail Step 1

2. Then, lightly push the DIN-Rail into the track.

Fig. 5: Installation to DIN-Rail Step 2

3. Check if the DIN-Rail is tightened on the track or not.

4. To remove the industrial switch from the track, reverse steps above.

1 2 3 4 5 6 7 8 9 10

Sin comentarios

Microsens 10/100Base-TX to 100Base-FX Manual de usuario Pagina 7